8 inch small sludge pump centrifugal dredging sand slurry pump

Gravel pump is mainly used for continuous transportation of strong abrasive materials that cannot be transported by general slurry pump due to too large particles. It is suitable for dredging, sand absorption, river dredging, mining and metal smelting slag transportation.

Structural features of 8 inch small sludge pump centrifugal dredging sand slurry pump

1. This series of gravel pump is a horizontal centrifugal pump with single pump shell structure. In a broad sense, it also belongs to a kind of slurry pump.
2. Special clamps are used to clamp the pump body and pump cover. The outlet direction of the pump can be at any position of 360 degrees, which is convenient for installation and use.
3. The bearing assembly of gravel pump adopts cylindrical structure, which is convenient to adjust the clearance between impeller and pump body, and can be removed as a whole during maintenance.
4. The bearing is lubricated with grease.
5. There are three types of shaft seals for gravel pump: packing seal, auxiliary impeller seal and mechanical seal.
6. Gravel pump has wide flow passage, good cavitation performance, high efficiency and wear resistance.
7. Transmission modes mainly include: V-belt transmission, elastic coupling transmission, gear reducer transmission, hydraulic coupling transmission, thyristor speed regulation, etc.
8. Material of flow passage parts: nickel containing high chromium wear-resistant alloy.
9. A variety of speeds and variants are adopted to make the pump run under the best working condition.
10. It has long service life and high operation efficiency, and can meet many kinds of bad transportation conditions.

Application fields
1. G series pumps are horizontal centrifugal pumps with single pump shell structure.
2. Special clamps are used to clamp the pump body and pump cover. The outlet direction of the pump can be at any position of 360 degrees, which is convenient for installation and use.
3. The bearing assembly of the pump adopts cylindrical structure, which is convenient to adjust the clearance between the impeller and the pump body, and can be removed as a whole during maintenance. The bearing is lubricated with grease.
4. The shaft seal forms of the pump include packing seal, auxiliary impeller seal and mechanical seal.
5. The pump has wide flow passage, good cavitation performance, high efficiency and wear resistance.
6. The transmission modes mainly include V-belt transmission, elastic coupling transmission, gear reducer transmission, hydraulic coupling transmission, variable frequency drive device, thyristor speed regulation, etc.
7. The flow passage parts are made of high hardness wear-resistant alloy cast iron.
8. A variety of speeds and variants are adopted to make the pump run under the best working condition. It has long service life and high operation efficiency, and can meet many kinds of bad transportation conditions.
9. GH pump is a high lift pump. It is mainly used for continuous transportation of strong abrasive materials that cannot be transported by general slurry pump due to too large particles. It is suitable for dredging, sand absorption, river dredging, mining and metal smelting slag transportation.

Structure

Certificate

Contact
Email: info@deponpump.cn
Whatsapp:+8618132711119